Electric Bundle Extractor
The electric heat exchanger bundle puller is a high-efficiency unit for petrochemical maintenance, driven by an electric motor and gear reducer with a sprocket-and-chain system to pull out and push in tube bundles. It supports manual, wired, and wireless remote operation, and its three-dimensional parametric structure ensures high strength, reliable performance, shorter shutdown time, and reduced labor costs.
Special Features
-
Powerful electric drive – Motor and gearbox with chain transmission for smooth, efficient pulling and pushing of heavy bundles.
-
Flexible operation modes – Supports manual, wired remote, and wireless remote control for safer, easier operation.
-
Compact and durable structure – Robust 3D-designed frame ensures high reliability, reduced downtime, and lower labor costs.
15–100
Pulling force range (t)
15–100
Tube bundle load capacity (t)
6-15
Tube bundle length range (m)
100-350
Tube bundle diameter range (mm)
Electric Bundle Extractor Models and Technical Data
Customized designs are available. Maximum bundle length up to 15 m and higher pulling force can be provided on request.
| ITEM / MODEL | QW15-6 | QW25-6 | QW45-12 | QW60-9 | QW75-12 | QW85-12 | QW100-15 |
|---|---|---|---|---|---|---|---|
| Max. bundle length (mm) | 6000 | 6000 | 12000 | 9000 | 12000 | 12000 | 15000 |
| Max. bundle diameter (mm) | 1000 | 1400 | 1800 | 2200 | 2400 | 2600 | 2800 |
| Max. pulling force (t) | 15 | 25 | 45 | 60 | 75 | 85 | 100 |
| Max. load (t) | 20 | 30 | 45 | 60 | 75 | 85 | 100 |
| Self weight (t) | 3.5 | 4.8 | 9.3 | 9.6 | 13.2 | 17.2 | 20.2 |
| Overall dimensions (L×W×H, mm) | 9600×1200×1200 | 9600×1600×1230 | 15600×2000×1300 | 12600×2400×1450 | 15600×2600×1550 | 15600×2800×1750 | 18600×3000×1770 |
| Total power (kW) | 9 | 13.2 | 18 | 18 | 21.5 | 22.5 | 22.5 |
Pulling force test & verification
To ensure the safety and reliability of our bundle extractor, we carried out full-load pulling force tests on site.
The main test conditions were as follows:
Test machine: Diesel bundle extractor 65 T (QW65 series)
Test load: up to 70 T simulated bundle weight
Continuous pulling test duration: 30 minutes
Result: no structural deformation, normal hydraulic temperature, stable pressure without leakage.
The test proves that the actual pulling capacity meets and exceeds the rated value, providing a safe margin for field operation.
Diesel Bundle Extractor FAQ
A: This equipment is mainly used for extracting and reinstalling tube bundles of shell-and-tube heat exchangers. It is suitable for major overhauls, shutdown maintenance, and emergency repair operations in refineries, chemical plants, LNG plants, and power plants. It is particularly well suited for projects with heavy tube bundles, severe fouling, limited on-site space, and strict requirements on minimizing downtime.
A: Model selection mainly depends on three parameters:
Maximum tube bundle weight (including fouling) – we recommend keeping a 20–30% safety margin.
Tube bundle length – standard handling range is approx. 6–15 m; beyond this can be customized.
Site conditions – for example, whether there is heavy fouling and whether frequent continuous operation is required.
For instance, if the maximum tube bundle weight is 45 t, we recommend selecting the 65T model to ensure sufficient pulling force to deal with fouling and potential sticking.
A: For standard models, the rated pulling capacity is approximately 25–100 tons. The typical tube bundle parameters it can handle are:
Tube bundle length: approx. 6–15 m
Tube bundle diameter: approx. 100–350 mm
The exact applicability should be checked against the actual heat exchanger drawings, and we can verify the parameters and recommend a suitable model based on your project data.
A:
A relatively flat and solid ground is required for placing the main unit and installing the rails.
The ground must have sufficient load-bearing capacity for the equipment weight and the tube bundle weight.
Reserve enough operating space in the length direction of the equipment so that the tube bundle can be fully extracted.
Confirm in advance the lifting conditions (crane capacity, lifting points, etc.).
If the site conditions are limited, we can provide simplified layout recommendations or customized solutions.
A: For standard models without special customization, the typical delivery time is about 3–6 months after order confirmation.
If you require special pulling capacity, extended rails, explosion-proof configuration, or other customized options, the delivery time may be slightly longer. The exact schedule will be confirmed in our official quotation and contract.